Today in DF I started over. I made a new kart this time out of ply-wood because the foam was too flimsy and when I took it out of the cupboard today it broke. I have made a similar design, and though it was a bit harder to sand in a way that the mass of the kart at the front slowly built up, I did it. This is to reduce friction. I have found that working with the ply-wood is much easier to draw the lines on it, in order for the wheels to angle up properly. I took the tires from my old design and began hammering them down when it was time to pack up.
I believe that I'm working a lot quicker through the project know that I know and am confident with what I am doing.
No comments:
Post a Comment